|
Review Delta DP350 Shopmaster 1/3 Horsepower 12-Inch Bench Drill Press
|
 |
| Delta DP350 Shopmaster 1/3 Horsepower 12-Inch Bench Drill Press |
 |
Pros: well designed tool of good quality
Cons: lubricating pulleys is rather strenuous
|
|
|
Technical Details
- 1/3-horsepower 12-inch bench drill press with built-in gooseneck lamp
- Variable speed drive system (620 to 3,100 rpm); tilting table; rack-and-pinion depth adjustment
- Heavy cast iron construction minimizes vibrations
- Standard 3-jaw, 1/2-inch capacity chuck
- 22 by 11 by 37 inches; 78 pounds; 2-year warranty
The Delta DP350 Shopmaster 1/3 Horsepower 12-Inch Bench Drill Press is a well-designed tool of good quality. The motor, spindle and speed control system are solidly fixed to a one-piece cast iron frame. Sheet steel panels complete the remainder of the enclosure. Rubber pieces isolate the top cover. The depth control system has a quick adjust feature. It drills very accurately, excellent when you use tap drills, for threading stock. This machine is very accurate.
I especially like the adjustable speed control which can be set while the drill is running. This gives very precise control over the material being drilled. I only have two negative comments. First in order to lubricate the pulleys you have to remove six screws. It would be better if they had a hinge and quick release. The second issue was in the packaging and shipment. Otherwise this is an excellent drill press essential for every workshop. |
|
|
